Book Design & Formatting
How to Format a Book for KDP: Ebook and Paperback Steps
By the Inkora team · Nov 15, 2026 · 11 min read
To format a book for KDP, you need two different files. The Kindle ebook is a reflowable EPUB, a file with clean styles, real chapter headings and a working table of contents, and no page numbers or fixed layout. The paperback is a PDF built to an exact trim size, with margins, a gutter, running heads, page numbers and embedded fonts.
The steps below take you through both, in order. Each format ends with a checklist.
What do you need before you start formatting?
Gather these before you touch any layout settings:
- A finished, edited manuscript. Formatting is the last step. If you change the text afterwards, you will have to redo work in both files.
- Your front and back matter. This means the title page, copyright page, dedication, table of contents, acknowledgments, author bio and any "also by" list. If you're unsure what belongs where, see what front matter is in a book.
- A decision on trim size for the paperback. This affects page count, spine width and cover size.
- A word processor that uses styles. Microsoft Word, LibreOffice and Google Docs all work. A dedicated layout tool also works.
- Kindle Previewer, Amazon's free tool for checking how an ebook displays on different devices.
- Your KDP account. The Amazon KDP publishing guide covers account setup if you haven't done it yet.
Step 1: Lock the text
Read the manuscript one last time. Fix typos and settle the chapter titles. After this point, treat the text as frozen.
If a correction is needed later, make it in your master file. Then regenerate both the EPUB and the PDF from that file. Patching the two files separately is how ebook and print editions drift apart.
Step 2: Understand how ebook and print formatting differ
Most formatting mistakes happen when someone tries to use one file for both. A Kindle reader can change the font, text size and screen size, so the text has to reflow. A printed page never changes, so every measurement has to be exact.
| Element | Kindle ebook (reflowable EPUB) | Paperback (print PDF) |
|---|---|---|
| File you upload | EPUB (KDP also accepts DOCX and Kindle Create files) | |
| Page size | None; text reflows to the screen | Fixed trim size, e.g. 5.5" × 8.5" or 6" × 9" |
| Page numbers | None | Yes, usually in the header or footer |
| Running heads | None | Optional, but standard in most books |
| Margins and gutter | Handled by the device | You set them; the gutter grows with page count |
| Fonts | Reader chooses; avoid forcing a body font | You choose and must embed them |
| Table of contents | Linked, and built from your headings | Printed, with page numbers |
| Blank pages | Remove them | Sometimes needed so chapters open on a right-hand page |
| Cover | Separate JPEG or TIFF, ideally 1600 × 2560 px (KDP's published guidance) | Separate full-wrap PDF: back, spine and front |
For a deeper explanation of the two layout types, see reflowable vs fixed layout.
How do you format a Kindle ebook for KDP?
Step 3: Clean the manuscript with styles
Reflowable ebooks depend on consistent styles, not manual formatting.
- Use a "Normal" or body style for every paragraph. Set the first-line indent in the style. Don't use tabs or spaces.
- Remove extra blank lines between paragraphs. Use paragraph spacing in the style instead.
- Don't force a font size or typeface on body text. Readers will change it anyway. Forced settings can override their choice or display badly.
- Delete headers, footers and page numbers. They have no meaning in an ebook.
- Replace print-only references. "See page 42" should become "see Chapter 5" or an internal link.
- Keep scene breaks visible. Use a centered symbol, such as three asterisks, rather than an empty line. Empty lines can vanish at the bottom of a screen.
Step 4: Mark chapters and build the table of contents
- Apply a heading style (Heading 1, for example) to every chapter title. Use the same style for front and back matter sections you want in the contents.
- Insert a page break before each chapter. This makes each one start on a fresh screen.
- Generate a table of contents from those headings so each entry links to its chapter.
- Keep the front matter short. Amazon's "Look Inside" sample starts at the beginning of the file. A long run of front matter uses up the sample before readers reach chapter one. Many authors move acknowledgments and the "also by" list to the back.
When you export to EPUB, most tools also create the ebook's internal table of contents from your headings. This is the menu readers open from the Kindle toolbar. Kindle Previewer will show you whether it worked.
Step 5: Export the EPUB
Export or convert the cleaned file to EPUB. Word, Kindle Create, LibreOffice with an EPUB export, Calibre and dedicated formatting tools can all produce one. KDP no longer accepts MOBI for reflowable ebooks, so don't spend time on that format.
If you write and format in Inkora, you can export an EPUB 3 file directly. You also get a Kindle cover JPG at 1600 × 2560 px, so the ebook side of your files comes from the same source as the print edition.
Step 6: Preview it on every device type
Open the EPUB in Kindle Previewer. Check it in the phone, tablet and e-reader views. Look for:
- Chapters that don't start on a new screen
- Headings in the wrong size or style
- Table of contents links that go to the wrong place
- Odd gaps, stray characters or broken quotation marks
- Images that are tiny, cut off or blurry (if your book has any)
Fix problems in the source file and export again. Avoid editing the EPUB by hand unless you know HTML and CSS.
Kindle ebook checklist
- All body text uses one paragraph style with a style-based first-line indent
- No tabs, double spaces or empty lines used for layout
- Every chapter title uses the same heading style
- Page break before each chapter
- Linked table of contents generated from headings
- No headers, footers or page numbers
- No "see page X" references
- Scene breaks use a visible symbol
- Front matter kept short; extras moved to the back
- Checked in Kindle Previewer on phone, tablet and e-reader views
- Cover saved separately as JPEG or TIFF in RGB (KDP lists 1600 × 2560 px as ideal)
How do you format a paperback interior for KDP?
Step 7: Choose a trim size
Trim size is the final size of the printed book. Common choices are 5" × 8", 5.5" × 8.5" and 6" × 9" for fiction and general nonfiction. Larger sizes such as 7" × 10" or 8.5" × 11" suit workbooks and textbooks. Square formats suit picture-heavy books.
Look at similar books in your genre and match them. Trim size changes your page count, which changes your printing cost and spine width. Run your word count through the book page count calculator to compare sizes before you commit.
Set your document's page size to the trim size before you do anything else.
Step 8: Set the margins and gutter
The gutter margin is the inside margin, where pages meet the spine. The thicker the book, the more paper curves into the binding. That means a long book needs a wider gutter than a short one.
KDP publishes a table of minimum inside margins by page count. It also lists minimum outside margins, which differ depending on whether your book uses bleed. Check the current figures in KDP's paperback help pages before setting yours.
Treat those minimums as a floor, not a target. Most professionally formatted books use more generous margins, which are easier to read and less likely to trigger a review warning.
In your software, use mirrored margins, sometimes called "facing pages." This keeps the gutter on the inside of both left and right pages.
Step 9: Decide whether you need bleed
Bleed is only needed if something on an interior page runs to the edge of the paper. This might be a photo, a background color or a decorative border. Most text-only novels don't need bleed.
If you do need it, KDP's guidance says to make the page slightly larger than the trim size. You add 0.125" to the top, bottom and outside edge, and choose "bleed" when you upload. Confirm the exact page dimensions in KDP's help pages for your trim size.
Step 10: Add running heads and page numbers
Page numbers. Odd numbers go on right-hand (recto) pages and even numbers on left-hand (verso) pages. Common conventions:
- Number the main text with Arabic numerals starting at 1 on the first page of chapter one.
- Leave front matter unnumbered, or number it with lowercase Roman numerals.
- Leave numbers off blank pages and usually off chapter-opening pages.
Running heads. These are the short lines at the top of each page. A common pattern is the author name on left-hand pages and the book title on right-hand pages. Nonfiction often uses the chapter title on the right instead. Leave running heads off chapter openers, blank pages and front matter.
In Word and similar tools, this needs section breaks between chapters. You also need "different first page" and "different odd and even pages" turned on. It's fiddly, so check every chapter opening.
Step 11: Set fonts, spacing and chapter openings
- Body font. Choose a readable serif typeface designed for print. Common sizes fall between 10 and 12 points, depending on the font and trim size.
- Line spacing. Slightly more than single spacing reads well. Avoid double spacing, which inflates page count.
- Alignment. Justified text with hyphenation turned on is standard in printed books. Check for wide gaps between words.
- Widows and orphans. Turn on control for single lines stranded at the top or bottom of a page.
- Chapter openings. Start each chapter on a new page. Many books start chapters on a right-hand page, which sometimes means inserting a blank left-hand page. Some authors add a drop-down from the top of the page for the chapter title.
- Printed table of contents. Include page numbers. Update it after every layout change.
Step 12: Export a print-ready PDF
Export to PDF with all fonts embedded. KDP flags PDFs with missing fonts. Keep images at print resolution (300 DPI is the commonly recommended figure). Make sure the PDF's page size exactly matches your trim size, plus bleed if you chose it.
Inkora exports a print-ready interior PDF at eight trim sizes, including 5 × 8, 5.5 × 8.5 and 6 × 9. It also exports a full-wrap cover PDF with the spine width calculated from the page count. You still upload both files in your own KDP account.
Paperback interior checklist
- Page size matches the trim size (plus bleed only if needed)
- Mirrored margins with an inside margin at or above KDP's minimum for your page count
- Outside, top and bottom margins at or above KDP's minimums
- Page numbers on the correct pages; none on blanks
- Running heads on text pages only; none on chapter openers or blanks
- Chapters start on a new page (on a right-hand page if that's your style)
- Printed table of contents with correct page numbers
- Copyright page includes your ISBN (KDP's free ISBN or your own)
- All fonts embedded in the PDF
- Images at print resolution; nothing important near the trim edge
- Final page count noted for your cover file
Step 13: How do you check everything before publishing?
- Build the cover after the interior is final. The spine width depends on page count and paper type. Use the spine width calculator once your page count is fixed.
- Upload the interior PDF in KDP and open the online previewer. It flags text outside the margins, missing fonts and size mismatches. Click through every page, not just the flagged ones.
- Order a proof copy. Holding the book shows problems a screen hides. Look for a gutter that swallows words, a font that's too small and page numbers that sit too close to the edge.
For the full paperback upload process, from details to pricing, see how to publish a paperback on KDP.
Common problems and fixes
The KDP previewer says text is outside the margins. Your margins are below KDP's minimum for your page count. Or a header, page number or image sits too close to the edge. Widen the inside margin and move headers and footers inward. Then export again.
The PDF page size doesn't match the trim size. This usually happens when the document was set to Letter or A4 and only the margins were changed. Set the page size itself to the trim size, then re-export.
Fonts aren't embedded. Turn on font embedding in your PDF export settings. Some programs call this "PDF/X" or "high quality print." If one font refuses to embed, replace it with a font whose license allows embedding.
The Kindle table of contents is missing or links go to the wrong place. Some chapter titles probably use manual bold and size instead of the heading style. Apply the heading style everywhere and regenerate the contents. Then re-export the EPUB.
The ebook has huge gaps or blank screens. Look for empty paragraphs, manual line breaks or double page breaks in the source file. Delete them, rely on paragraph spacing and one page break per chapter, and re-export.
The cover is rejected after you changed the interior. Adding or removing pages changes the spine width. Rebuild the cover with the new page count. If KDP rejects it for other reasons, see what to do if KDP rejects your book.
You found a typo after publishing. Fix it in the master file and regenerate both formats. Then upload the new file to the existing title in KDP. You don't need a new listing for a correction.
Formatting for KDP comes down to two files with opposite rules: an ebook that reflows freely and a print PDF where every measurement is fixed. Work from one locked master manuscript and use the checklists above. Always preview the ebook and order a proof before you click publish.
Frequently asked questions
Can I use my KDP EPUB on Apple Books, Kobo and Google Play Books too?+
Usually yes, as long as it's a standard EPUB with no Kindle-specific features. Upload it to each store's own previewer, because each one validates files slightly differently.
Do my ebook and paperback need separate ISBNs?+
According to KDP's published terms, a Kindle ebook doesn't need an ISBN because Amazon assigns a free ASIN. A paperback does need one, either KDP's free ISBN or your own. Confirm the current rules in your KDP dashboard.
Can I format a book for KDP in Google Docs?+
Google Docs handles a simple ebook reasonably well if you use heading styles consistently. It's limited for print, especially for mirrored margins and different running heads on left and right pages. Many authors use it to write, then move to another tool for the paperback.
Will KDP format my book for me?+
KDP doesn't reformat your file, but it offers Kindle Create, a free tool for building ebook and basic print layouts. Whatever tool you use, you are responsible for checking the result in the previewer.
Can I reuse my paperback interior for a KDP hardcover?+
Don't assume so. KDP's hardcover options, trim sizes and cover setup differ from paperback, so check KDP's hardcover guidance and adjust the file before uploading.
Should my ebook and paperback have the same front matter?+
Mostly, but not exactly. The paperback needs a printed table of contents with page numbers and sometimes blank pages. The ebook should keep front matter short so the sample reaches the story or content quickly.
Turn your idea into a finished book
Inkora plans, writes and formats your book, designs the cover and exports print-ready PDF, EPUB and DOCX for every store.
Start writing free