Book Design & Formatting

KDP Cover Size: Kindle Ebook vs Paperback Full-Wrap Dimensions

By the Inkora team · Nov 17, 2026 · 9 min read

For a Kindle ebook, KDP's published guidance gives an ideal cover size of 1600 × 2560 pixels: a single front image in JPEG or TIFF, RGB colour, with a minimum of 625 × 1000. A KDP paperback cover is one PDF containing the back cover, spine and front cover side by side, plus 0.125" of bleed on every edge. Its width is (2 × trim width) + spine width + 0.25", and its height is trim height + 0.25".

Every Kindle book uses the same ebook size. A paperback's size changes with your trim size, number of pages and paper choice, so you have to calculate it for each book. The rest of this guide shows how.

Kindle ebook cover size

KDP's published cover guidance for Kindle eBooks says:

  • Ideal size: 1600 × 2560 pixels
  • Aspect ratio: 1.6:1 (height is 1.6 times the width)
  • Minimum: 625 × 1000 pixels
  • File type: JPEG or TIFF
  • Colour: RGB

The Kindle cover is only the front. There is no spine, no back cover and no bleed. It is a single rectangular image that appears on your product page, in search results and on readers' devices.

Most of the time, readers first see that image at thumbnail size in a search results list. Design at 1600 × 2560, but check how it looks when you shrink it to the size of a postage stamp. If you can't read the title at that size, the type is too small or too thin.

KDP's requirements can change, so confirm the current figures on the cover upload page in your KDP dashboard before you export.

Using the same ebook cover size on other stores

In most cases you can. 1600 × 2560 meets or exceeds the minimums the main ebook stores publish. Here is what each store's published terms say, as of writing:

Store File types Published size guidance
Amazon KDP (Kindle) JPEG, TIFF Ideal 1600 × 2560 px (1.6:1), minimum 625 × 1000, RGB
Apple Books JPEG, PNG At least 1400 px on the shortest side; 1600 × 2400 or larger recommended
Google Play Books JPEG, PNG, TIFF 1:1.6 recommended (1600 × 2560), at least 640 px on the shortest side
Kobo Writing Life JPEG, PNG At least 1400 px on the short side recommended; 1600 × 2560 works
Barnes & Noble Press JPEG, PNG At least 1400 px on the shortest side (verify in B&N Press)
Draft2Digital JPEG 1600 × 2400 or larger recommended; 1600 × 2560 works

If you publish wide, one 1600 × 2560 JPEG will usually cover every store. Check each store's upload page before you submit, because those numbers get revised.

KDP paperback cover size

A paperback cover is a full-wrap cover: one continuous image that wraps around the printed book. Reading the PDF from left to right, you have:

  1. Bleed (0.125")
  2. Back cover (your trim width)
  3. Spine (calculated from page count and paper)
  4. Front cover (your trim width)
  5. Bleed (0.125")

The top and bottom edges get the same 0.125" bleed. If those terms are new to you, the glossary entries on full-wrap covers and bleed explain them.

So the formulas are:

  • Full cover width = 0.125 + trim width + spine width + trim width + 0.125 (which simplifies to 2 × trim width + spine width + 0.25")
  • Full cover height = trim height + 0.25"

Bleed is the extra image that runs past where the book gets trimmed. The cutting machine isn't perfectly precise, so your background has to extend past the final edge. That way a slightly off cut never leaves a thin white line.

Why your Kindle cover won't work for the paperback

There are three reasons.

The shape is different. Kindle covers are 1.6:1. A 6" × 9" paperback front is 1.5:1, and a 5" × 8" front is 1.6:1. Only some trim sizes match the ebook ratio. For the others, you need to re-lay out the front, not just stretch it.

Print needs more pixels. Print covers are normally prepared at 300 DPI. A 6" × 9" front panel at 300 DPI is 1800 × 2700 pixels, which is larger than 1600 × 2560. Enlarging a smaller image to fill that space usually makes it look soft or blurry when printed.

The paperback needs a spine and back cover. You still have to design a back cover and a spine, and the background has to run continuously across all three panels and into the bleed.

Most designers build the paperback wrap first at full print resolution. Then they crop or re-lay out the front panel into a 1600 × 2560 ebook version. Going the other way, from small ebook cover to large print cover, rarely works well.

Calculating the spine width

Spine width depends on two things: your page count and your paper type. Thicker paper and more pages give a wider spine.

KDP's help pages publish a per-page thickness for each paper option. For black-and-white interiors, KDP lists roughly 0.002252" per page for white paper and 0.0025" per page for cream paper. Colour interiors use different figures. Confirm the current numbers in KDP's cover calculator or help pages, because they are what KDP will check your file against.

The calculation is:

Spine width = page count × per-page thickness

For example, a 300-page book on white paper has a spine of 300 × 0.002252 = 0.6756", which rounds to about 0.676".

Page count here means the final page count of your print interior PDF, including blank pages and front matter. It is not your word count and not the page count of your Word file. If your interior isn't final yet, your spine width isn't final either.

For a fuller explanation, see how to calculate spine width. If you'd rather skip the arithmetic, use the book spine width calculator.

Worked examples: full-wrap dimensions for common trim sizes

Here are three full calculations using the formulas above and KDP's published per-page figures. Treat them as examples of the method, not as files to upload blind. Always confirm against KDP's own cover template for your exact book.

Example 1: 6" × 9" novel, 300 pages, white paper

  • Spine: 300 × 0.002252 = 0.676"
  • Width: 6 + 0.676 + 6 + 0.25 = 12.926"
  • Height: 9 + 0.25 = 9.25"
  • At 300 DPI: about 3878 × 2775 pixels

Example 2: Same 6" × 9" book, 300 pages, cream paper

  • Spine: 300 × 0.0025 = 0.75"
  • Width: 6 + 0.75 + 6 + 0.25 = 13.0"
  • Height: 9.25"

Changing only the paper type made the cover about 0.074" wider. That is enough to push spine text off-centre if you don't redo the file.

Example 3: 5" × 8" book, 200 pages, cream paper

  • Spine: 200 × 0.0025 = 0.5"
  • Width: 5 + 0.5 + 5 + 0.25 = 10.75"
  • Height: 8 + 0.25 = 8.25"
Trim size Pages Paper Spine Full cover width Full cover height
6" × 9" 300 White 0.676" 12.926" 9.25"
6" × 9" 300 Cream 0.75" 13.0" 9.25"
5" × 8" 200 Cream 0.5" 10.75" 8.25"

If you haven't settled on a trim size yet, read what trim size means before you start on the cover. Changing trim later means rebuilding the entire wrap.

The book cover size calculator runs these numbers for you. Enter your trim size, how many pages the book has and which paper you chose, and it returns the full-wrap width, height and pixel dimensions.

Where text and the barcode go on the wrap

The calculated size is only half the job. Placement matters just as much.

  • Keep text away from the edges. Anything near the trim line or the spine fold can get cut off or wrap around the edge. Keep titles, author names and back-cover copy well inside each panel. KDP's downloadable cover template marks the safe areas.
  • Spine text needs room. Centre the spine text, and leave a margin on both sides so it doesn't creep onto the front or back. Very thin books may not be allowed spine text at all. KDP sets a minimum page count for this, so check the current rule.
  • Leave the barcode area clear. KDP places the barcode in the bottom-right of the back cover. Don't put important text or a busy focal point there, because the barcode box will cover it.
  • Extend the background into the bleed. Every edge needs background colour or image all the way out. Only background belongs in the bleed, never text.

Getting the exact template from KDP

KDP offers a cover calculator and a downloadable template. You enter your trim size, page count, paper type and interior colour, and it gives you a PNG and PDF guide showing trim lines, bleed, spine and barcode area. Place that template on a layer underneath your design, line everything up, and hide the template layer before exporting.

This is the most reliable way to make sure your numbers match what KDP's review will check. If you're also printing through IngramSpark, note that IngramSpark asks for a cover built on its own template. Its spine width and barcode position can differ from KDP's, so make a separate file for each.

Inkora creates both cover files

Inkora exports a Kindle cover JPG at 1600 × 2560 and a full-wrap cover PDF with the spine width calculated from your book's page count. Both come from the same cover designer, which offers typographic templates and optional AI artwork. You still upload the files yourself in your own KDP account.

For the rest of the print setup, from interior to proof copy, see how to publish a paperback on KDP.

Common problems and fixes

"Cover dimensions don't match" error. This almost always means the page count changed after you built the cover. Adding a dedication or moving the copyright page is enough. Recheck the final page count of the interior PDF you actually uploaded, recalculate the spine and rebuild the wrap.

Wrong paper type. You designed for cream but selected white in KDP, or the other way round. Either change the paper setting to match your cover, or recalculate the spine for the paper you want.

Text too close to the edges or spine. KDP's review flags text that sits in the bleed or crosses the fold. Move text inward using the KDP template's safe lines and re-export.

Blurry or pixelated print. The artwork was too small for 300 DPI at full size, often because an ebook image was enlarged. Rebuild the front from higher-resolution artwork, or switch to a typographic design that doesn't depend on a large image.

White slivers at the edges. The background didn't extend fully into the bleed. Stretch or extend it out to the outer edge of the template.

Something on the back cover hidden by the barcode. Move it out of the bottom-right area and re-upload.

Kindle cover looks letterboxed or cropped. The image isn't 1.6:1. Re-export at 1600 × 2560 rather than uploading the paperback front as-is.

If KDP has already rejected your file, what to do when your paperback cover fails KDP review walks through each rejection message and the fix.

The short version

The Kindle cover is a single 1600 × 2560 front image, and it's the same for every book. A paperback cover, by contrast, is a full wrap you calculate from trim size, final page count and paper type, with a 0.125" bleed around every edge. Finish the interior first, then build the wrap against KDP's template, and you'll avoid most cover rejections.

Frequently asked questions

Does a Kindle-only book need a back cover or spine?+

No. If you only publish the ebook, you need just the front image. You only need the back cover and spine when you add a paperback or hardcover edition.

Is 1600 × 2400 acceptable for a Kindle cover?+

It's well above KDP's published minimum of 625 × 1000, but it isn't the 1.6:1 ratio KDP lists as ideal. If you want one file for every store, 1600 × 2560 is the safer choice. Check the upload page in your KDP dashboard for the current guidance.

Do I need a new paperback cover if I edit the interior after publishing?+

Only if the page count changes. A different page count changes the spine width, so recalculate and re-export the wrap before you upload the revised interior.

Is a KDP hardcover cover the same size as the paperback cover?+

No. Hardcover covers wrap around the boards, so the dimensions and template are different. Download KDP's hardcover template for your exact trim size and page count rather than adapting the paperback file.

Can I put my ebook cover's file name or ASIN anywhere on the print cover?+

You don't need to. KDP adds the barcode itself in the bottom-right of the back cover, and nothing else identifying is required. Just keep that area clear of important design elements.

Turn your idea into a finished book

Inkora plans, writes and formats your book, designs the cover and exports print-ready PDF, EPUB and DOCX for every store.

Start writing free