Book Design & Formatting
Best Trim Size for a Novel: 5x8 vs 5.5x8.5 vs 6x9
By the Inkora team · Nov 16, 2026 · 9 min read
For most self-published novels, 5.5" x 8.5" is the safest trim size. It looks like a standard trade paperback, feels comfortable in the hand, and keeps page counts reasonable. Choose 5" x 8" for shorter, pacier genre fiction, and 6" x 9" for long novels where you need to control page count and printing cost.
All three are standard sizes on the major print-on-demand platforms. The rest of this guide explains how to pick between them for your book, your genre and your budget.
What trim size actually means for a novel
Trim size is the final width and height of the printed book after the pages are cut. It is listed width first, so 6" x 9" is 6 inches wide and 9 inches tall. If the term is new to you, what trim size is and how it works covers the basics.
For a novelist, trim size controls four things:
- How the book feels. Size affects how it sits in the hand, in a bag and on a shelf next to other books.
- Page count. The same manuscript produces more pages on a small trim and fewer on a large one.
- Printing cost. On print-on-demand, cost is driven mostly by page count, so trim size affects your margin indirectly.
- Cover and spine dimensions. Your cover file has to be built for the exact trim and page count.
You choose trim size once, early, and design your interior and cover around it. It is hard to change later, so it is worth spending ten minutes on the decision.
How 5x8, 5.5x8.5 and 6x9 compare for fiction
Here is a quick side-by-side. Page area is plain arithmetic (width × height). The other columns describe general tendencies, not fixed rules.
| Trim size | Page area | Feel in the hand | Typical fiction use | Page count for the same manuscript |
|---|---|---|---|---|
| 5" x 8" | 40 sq in | Compact, easy to hold one-handed | Thrillers, romance, cozy mystery, novellas | Highest |
| 5.5" x 8.5" | 46.75 sq in | Classic trade paperback | Most adult fiction, literary fiction, YA | Middle |
| 6" x 9" | 54 sq in | Larger, more substantial | Epic fantasy, long sci-fi, saga-length books | Lowest |
A 6x9 page has about 35% more area than a 5x8 page. With the same font, size and margins, a novel set at 6x9 can come out roughly a quarter shorter in page count than the same text at 5x8. The exact difference depends on your typography, so treat that as a ballpark.
5" x 8"
This size feels light and quick. It suits books meant to be read fast: thrillers, romance, cozy mysteries, and shorter novels and novellas. A shorter book also looks thicker at 5x8 than it would at 6x9, which helps when a slim spine might otherwise make the book look insubstantial.
The downside is page count. A long novel at 5x8 can become a brick, and more pages means a higher printing cost.
5.5" x 8.5"
This is the middle option and the one most self-published novelists land on. It looks like the trade paperbacks readers already own, works for almost any genre, and balances readability with page count. If you can't decide, choose this one.
6" x 9"
This size has a lot of space on each page. That helps with long manuscripts: an epic fantasy that would run very long at 5x8 becomes more manageable at 6x9, and cheaper to print.
The risk is that 6x9 can feel more like non-fiction or a textbook, especially for a short novel. A 50,000-word book at 6x9 may look thin and a little bare on the shelf. It is a common choice in self-publishing because it is the default on some platforms, not always because it suits the book.
What readers expect for different genres
Readers rarely measure books, but they notice when something feels off. A romance that looks like a textbook, or a literary novel that feels cramped, sends a small signal that the book wasn't professionally produced.
These are common patterns, not requirements:
- Romance, cozy mystery, thrillers: 5x8 or 5.5x8.5. These books are often read quickly and in series, and compact sizes fit that.
- Literary and book-club fiction: 5.5x8.5 is the usual choice. Slightly generous margins and a comfortable size suit slower reading.
- Young adult: 5.5x8.5 is common. Some YA uses 6x9, especially longer fantasy.
- Middle grade: smaller sizes such as 5.25x8 or 5.5x8.5 are common, since the readers' hands are smaller too.
- Epic fantasy and long science fiction: 6x9 is common for page-count reasons. 5.5x8.5 also works if the book isn't extremely long.
- Novellas and short novels: 5x8 gives the book more heft.
The best way to check your own genre is to look at the books you'd want yours shelved beside. Pull five or ten recent bestsellers in your exact subgenre and check the paperback's dimensions. On Amazon, they are listed in the product details section of each paperback page. If most of them cluster around one size, that's your answer.
Length matters too. If you aren't sure where your manuscript falls, typical word counts for novels by genre will help you estimate.
How trim size affects printing cost and royalties
On print-on-demand services like Amazon KDP, printing cost for a black-and-white paperback is based mainly on page count. KDP also groups trim sizes into standard and larger sizes, and larger trims cost more to print. Under KDP's published printing cost tables, 5x8, 5.5x8.5 and 6x9 generally fall in the same standard group. Check KDP's current printing cost page before you rely on that, because the tables can change.
In practice, the per-page rate is roughly the same across these three sizes, so the cost difference comes from page count. A smaller trim means more pages, and more pages means a higher printing cost.
That cost comes straight out of your royalty. Under KDP's published paperback terms, your royalty on Amazon is 60% of the list price minus the printing cost, or 50% for books priced below $9.99 on Amazon.com. With Expanded Distribution, the rate is 40% minus printing cost. Confirm the current rates in your KDP dashboard.
A worked example
Imagine a 100,000-word fantasy novel.
- At 5x8, with comfortable fiction typography, it might run well over 400 pages.
- At 6x9, with the same font and margins, it could come out about a quarter shorter.
Because every page adds to the printing cost, the 6x9 version costs less per copy. You can either keep the list price and earn more per sale, or lower the price to compete in your genre.
For a 60,000-word thriller, the difference is smaller in absolute terms, and the reader-expectation argument usually wins. A compact 5x8 or 5.5x8.5 thriller at a slightly higher printing cost is often the better product.
Don't guess at the numbers. Run your estimated page count through the page count calculator, then try a few list prices in the KDP royalty calculator for each trim size. Seeing actual royalty figures side by side makes the decision much easier.
How trim size changes readability
Trim size affects readability through layout rather than size alone. A good fiction page usually has:
- A body font around the size used in trade paperbacks (many designers use 10.5–12 pt, depending on the typeface)
- Line spacing a little larger than the font size
- Line lengths that don't force the eye to travel too far
On a 6x9 page, lines can get long if you keep the margins small. That tires readers over a full novel. Many designers fix this by widening the margins or slightly increasing the font size, which brings the page count back up. On a 5x8 page, the opposite problem appears: if you shrink the font to save pages, the book becomes cramped.
The inner margin also needs room. Thicker books curve more at the spine, so text near the binding becomes hard to read unless the gutter margin is wide enough. This matters most for long novels at small trim sizes.
Matching your paperback across editions and stores
If you publish the same paperback through more than one printer, use the same trim size everywhere. All three sizes in this guide are widely available, so this is easy.
Points to keep in mind:
- KDP and IngramSpark both offer 5x8, 5.5x8.5 and 6x9, but each builds its cover template slightly differently. Spine width and barcode position can differ, so make a separate cover file from each platform's own template. KDP vs IngramSpark explains the other differences.
- Hardcovers usually come in fewer sizes than paperbacks. If you plan a hardcover later, check the platform's hardcover trim list before you commit, so both editions can share a size and a cover design.
- Ebooks have no trim size. Kindle and other ereaders reflow the text, so this decision affects only print editions.
If you write and format in Inkora, you can export a print-ready interior PDF at 5x8, 5.25x8, 5.5x8.5, 6x9 and several other sizes. Comparing page counts across trims before you upload anything takes a few minutes.
Making the final decision
Use this short checklist:
- Check your genre. Look up the paperback dimensions of comparable recent books. Go with the size most of them use.
- Estimate your page count at your top two sizes.
- Compare royalties at a realistic list price for your genre.
- Order a proof. Holding a proof copy tells you more than any table. Check the font size, margins and how the book feels in the hand.
When the genre standard and the cost math disagree, lean toward the genre standard unless the cost difference is large. Readers judge the book in their hands. They never see your printing invoice.
Common problems and fixes
The page count came out much higher than expected. Check the font size, line spacing and margins first. Fiction interiors often carry extra blank pages from chapters that always start on a right-hand page. If the book is still too long, move up one trim size, for example from 5x8 to 5.5x8.5, instead of shrinking the font.
The 6x9 interior looks dense or textbook-like. Widen the outer margins, increase line spacing slightly, or step up the font size. If the book is under about 70,000 words and still looks thin and bare, 5.5x8.5 may suit it better.
Text disappears into the spine. Your gutter margin is too narrow for the page count. Increase it and re-export. Thicker books need more inner margin, and KDP's formatting guidelines list minimums by page count. How to format a book for KDP walks through margins and other interior settings.
The cover was rejected or the spine text is off-center. This usually means the cover was built for the wrong trim size or page count, or the page count changed after the cover was made. Rebuild the cover with the final page count using the book cover size calculator. If you use Inkora, its full-wrap cover PDF works out the spine width from your book's page count, so re-export the cover after any interior change.
You published and now want a different trim size. KDP's help pages list trim size among the details you can't change on a published paperback. The usual fix is to publish a new paperback edition at the new size and unpublish the old one. Check KDP's current help page for the exact steps and for whether you need a new ISBN.
Your KDP and IngramSpark editions look different. Make sure both use the same trim, paper type and interior file, and that each cover was built on that platform's own template. Order proofs from both and compare them side by side.
Start with the classic trade paperback size, 5.5x8.5, unless your genre or length clearly points elsewhere. Use 5x8 for compact genre fiction and novellas, and 6x9 for long books where page count drives cost. Check comparable books, run the royalty numbers, and order a proof before you hit publish.
Frequently asked questions
What trim size do traditional publishers use for mass-market paperbacks?+
Mass-market paperbacks are much smaller, around 4.25" x 6.87". Print-on-demand services generally don't offer true mass-market sizes or the thin paper they use, so most self-published novelists choose a trade size instead.
Can I use a different trim size for each book in a series?+
You can, but most authors keep a series at one size so the spines line up on a shelf and the covers can share a design. If book one is already out, match it unless there is a strong reason to change.
Does trim size affect how Amazon displays my book?+
Amazon lists the paperback's dimensions in the product details, and the cover thumbnail looks similar at any of these sizes. Shoppers mostly notice trim size after the book arrives, which is why matching your genre's norms matters.
Is 5.25" x 8" a good alternative for fiction?+
Yes. It sits between 5x8 and 5.5x8.5 and is used for some genre fiction and middle-grade books. Check that it is offered by every printer you plan to use before choosing it.
Should a poetry collection or short story collection use the same sizes?+
Short story collections usually follow the same choices as novels. Poetry often works better at 5.5x8.5 or 6x9 so that long lines don't wrap awkwardly.
Turn your idea into a finished book
Inkora plans, writes and formats your book, designs the cover and exports print-ready PDF, EPUB and DOCX for every store.
Start writing free